KansasKrawler
For sale here is a full custom steering arm for a 2.5 ton rockwell to run cross over steering made from 3/4" steel all pressed bends.It bolts right to the king pin studs and has a grease zert for the king pin joint. Also on the top end its drilled out to a small pilot hole so it can be finished out to what ever size you need for hiem joint or drilled out and tapered for tie rod ends. Yes its tall but it puts the steering at a good angle for all those high lifted trucks. Was made for a local guy who came up short on cash so his loss ur gain.
Will sell for $125.00 plus shipping so pm or call 316-305-4331





Quote 0 0
abnormal 4x4

how much raise is it?

ABNORMAL 4X4.. PARTS. WHEELS. TIRES AND EVERYTHING ELSE
407-398-3283
Quote 0 0
KansasKrawler

Sorry i forgot to put that, its around 14 inches from the bottom of the arm were it bolts to the king pin to the top of the arm were the steering link connects

Quote 0 0
KansasKrawler
Come on guys i know some one needs this lets sell it now!!!
Quote 0 0
KansasKrawler
TTT   BUMP

Quote 0 0
joeeldr
Still have this?
Quote 0 0
http://www.bigshocks.com/" target="_blank">