drkwaterdiver
This is a custom built tube chassis mud truck with full roll cage and 4 link suspension " WITHOUT MOTOR OR TRANSMISSION '' for sale . I am asking $15,000 or best offer no trades and have well over $30 grand in it not including motor and trans . I have posted a few pics and will list some of the parts on the truck . It has a center mounted divorced SCS 12.66 drop transfer case with 3 sets of gears , cause the case is ran by a drive shaft you can run any motor transmission combination you want too . The front axle is a 1979 ford dana 60 high pinion with full spool , 4:56 gears , chromoly axles , PSC full hydraulic steering and axle truss , over $5000 in front axle alone . Rear axle is a corporate 14 bolt with full spool , 4:56 gears , chromoly axles and axle truss with 14'' travel coil over shocks front and rear . The custom rims have a 3/4'' thick aluminum center that is bolted in to the steel rim with grade 8 bolts with cut BKT 171 12.4 x 24'' . The extra large radiator is mounted in the bed to the roll cage with 2 large electric fans , large transmission cooler is mounted under the truck in a protected enclosure . The entire fuel system , pump , filter , regulator is Aeromotive with 1/2'' lines to and from the carb with nylon covered braided steel lines and all aluminum fittings . I do have a stock 460 engine in pieces I will throw in if the price is met or at least a reasonable enough offer . This is a very light truck weighing around 4200 lbs with the motor / trans combo i had in it and never broke or had any kind of axles issues at all .  Please call or text Jeremy at 407-865-4239  I live in Apopka Fla.shop ranger1.jpg  photo (5) (800x600).jpg  photo (17).jpg
Quote 0 0
http://www.bigshocks.com/" target="_blank">